Inspired by our natural World, its weathered patterns and architecture within it Mr Pinchy & Co embrace our artisan’s time honoured skills and interpret these combined aesthetics into our designs.
Designed in Australia and World made with a raw luxe energy our pieces have a timeless presence, embracing a little quirk and the fundamentals of traditional quality. From lost wax cast brass objets, integrated marble, bone & diamond brass trays, hand blown & etched glass to architectural concrete planters, our range is diverse allowing it to be interpreted into traditional, mid-century or modern spaces.
Stocked in some of Australia’s most highly regarded designer homewares stores and carried internationally in 9 countries the brand is highly regarded across both retail and interior design circles, working with many of Australia’s top interior designers providing product for high-end projects in the residential and commercial spaces.
For a full list of the stores our products are available in please view our stockist list on our contact page
Mr Pinchy & Co pieces are made to last but there are a few simple tricks to keeping them in good nick and shining bright in your space over the years…
By nature brass will dull over time and build up a patina. If you like your brass nice and bright like us follow the below…
TO CLEAN: Using a soft cotton cloth you can apply a brass polish like ‘Brasso’ applied as a liquid or our preference ‘Autosol’ applied as a cream, rubbing onto all parts of the brass and then polishing off with a clean part of the cloth. Both of these brass cleaners are available at Bunnings or similar hardware stores.
EXPOSURE: Although we recommend featuring our pieces inside they can be placed in alfresco and even outdoors areas, but please bare in mind that the brass will tarnish and build up a dull gold/green patina in places which can still be polished back as brass is very resilient to rust.
All of our marble is highly polished but is pourous by nature and can be stained or get water marks if liquids are left on their surface. Always wipe away immediately.
TO CLEAN: Clean the marble surface with a few drops of neutral cleaner, stone soap (available at hardware stores or from a stone/tile dealer), or a mild liquid dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks. Do not use products that contain lemon, vinegar, or other acids. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Do not use scouring powders or creams; these products contain abrasives that may scratch the surface.
For the brass parts of these pieces please be carefull when using brass polish near the marble/filler especially the white marble/filler as this will mark. In this case you can apply the above cleaning solution or use a baby wipe which is very effective.
EXPOSURE: Only for inside. Do note leave your marble/brass pieces outside to weather.